Iridium Passive Omnidirectional SATCOM Antenna (+GPS) – Compact passive dual-band antenna

Details

  • Passive Antenna for Iridium terminals
  • Requires no pointing towards satellite
  • Rugged design for reliable performance in harsh conditions
  • Compact dual-band (SAT/GPS) antenna design
  • Smooth surface low loss radome
  • Built-in active GPS antenna
  • Mounts on any US-style Mounting Bracket with 1″-14NF threaded studs

Note: Cable loss below 3 dB is recommended

Link to: Iridium Product Page
Category:

Electrical specifications

Frequency

1616 – 1626.5 MHz, 1575.42 MHz (L-Band)

Impedance

50 ohm

Vswr

< 2.0

Satellite system

Iridium, GPS

Polarisation

RHCP (SAT)

Axial ratio

< 6 dB

Gain

2 dBic

LNA Gain

25 dB (GPS)

Noise figure

1.2 dB (GPS)

Supply voltage

3.0 – 5.5 V DC (GPS)

Current consumption, average

20 mA

Mechanical specifications

Color

Glossy White

Height

111 mm

Weight

320 g (Antenna only)

Diameter

Ø 94 mm

Mounting

Mounts on any US-style Mounting Bracket with 1″-14NF threaded studs

Mounting Place

On marine vessel or landbased vehicle

Mounting Instruction

Use the supplied counter-nut when mounting the antenna

Materials

ASA, POM, PCB, copper and chrome plated brass

Operating Temperature

-40°C to +70°C

Connector

SAT: TNC-female

Connector2

GPS: SMA-female

Cable

See “Part No.” below

Ingress protection

IP66

Vibration

IEC60945

Ordering information

65800-003

Antenna only – in hardbox

91004-011

5 m cable kit: SAT-cable w/TNC(m) and GPS-cable w/SMA(m) – in polybag

91004-021

8 m cable kit: SAT-cable w/TNC(m) and GPS-cable w/SMA(m) – in polybag

91004-031

10 m cable kit: SAT-cable w/TNC(m) and GPS-cable w/SMA(m) – in polybag

91004-041

15 m cable kit: SAT-cable w/TNC(m) and GPS-cable w/SMA(m) – in polybag

Packaging information

Type

Hardbox

About Scan Antennas